Shop – Page 11 – SmartSystem | Innovative Solutions for Filmmakers

SmartCAM Monitor SM7-PRO-3G
€ 3,049.94
SKU: 000009559
EAN: 8051411192862
- 7" 3G-SDI Hyper Bright monitor with up to 3200 nits.
- IPS screen with protection glass and special anti-reflective coating.
- Adaptive Backlight Management to always offer the best brightness based on outer environment.
- Specifically engineered to suit all the physical requirements by modern stabilizers.
- Perfectly balanced on its CG fixture (lateral mount / central hole).
- Special design able to address rain and water on dedicated paths.
- XTPort for fast data communication with other peripherals.
Case completely milled from solid aluminum, shot-peened and hard anodizedIN THE BOX:
- 1x SM7 PRO 3G 7" monitor / 3200 nits
- 1x 2pin-2pin push-pull connector
- 1x Resin case
- 1x Neoprene softshell
- 1x USB XTDongle for PC/MAC connection
Add to cart
SmartCAM Tempo
€ 573.34
SKU: 000009276
EAN: 8051411192657

Ruggedized 12G SDI Splitter with two reclocked output Upgraded version with Extended Voltage input Capabilities (10VD - 17/34VDC) OLED Display with INPUT signal information and Diagnostic SDI Eye pattern Polarity agnostic input / output 15mm rods attachment included USB Firmware upgradable
Add to cart
SmartCAM Zen
€ 1,244.34
SKU: 000007552
EAN: 8051411191575

Multi-core CPU 6 sensors multi-axis digital level indicatorPowered via USB or pushpull connector with daisy chain possibilityCase milled from solid aluminum, shot-peened and hard anodized
In the box
- SmartCAM Zen
- Cage
- 1x 1/4-20 UNC Screw
- Adhesive Pads kit
- Professional cleaner kit for Adhesive Pads
- 1x 2Pin DC Patch Cable compatible with Matrix Sleds
If you need different cable, take a look at our comprehensive cable catalog
Add to cart
SmartCAM Zen Cage Rev.2
€ 72.53
SKU: 000009583
EAN: 8051411192848

A new and improved Cage for Zen Digital Level Indicator.It minimize the oscillation of Zen due to improper installation granting a more stable behavior especially on low mode.NOTE: The rev.2 Cage is in bundle with all Zen system since June 2023.
Add to cart
SmartCAM Zen PRO Core
€ 719.74
SKU: 000009778
EAN: 8051411193026

Introducing our state-of-the-art Multi-Core CPU 6-Sensor Multi-Axis Digital Level Indicator, engineered for precision and reliability in various applications. This advanced device features a temperature-stabilized system, ensuring consistent and accurate readings under diverse environmental conditions.
Designed for versatility, the digital level indicator can be powered either through a robust 2-pin push-pull connector or seamlessly integrated into a daisy chain configuration via the XT-BUS, providing flexible connectivity options to suit your setup.
Encased in a durable, high-quality shell, the housing is meticulously milled from solid aluminum, then shot-peened and hard anodized for enhanced strength and resistance to wear and corrosion. This rugged construction not only protects the internal components but also ensures long-lasting performance, making it an ideal choice for demanding industrial environments or precision engineering tasks.
Experience the perfect blend of innovation, durability, and functionality with our multi-axis digital level indicator.
In the box
- SmartCAM ZenPRO Core
- 1x XT-BUS Patch Cable 40cm / 15.8"
NOTE
- The device can be used only in combination with a display XT-BUS compatible like SM7-PRO-3G
- The Zen Pro Core is equipped with a 15mm rod adapter. If you have different rod sizes, ensure a perfect fit with our additional Mini Clamps, available for 16mm (0.625 inches) and 19mm (0.75 inches) rods.
Add to cart
SmartCAM Zen PRO Mini Clamp 16mm/.625in
€ 42.64
SKU: 000010272
EAN: 8051411193265

Additional MiniClamp for Zen PRO Core, designed to accommodate rods measuring 16mm (0.625 inches).
The kit include
- 1x 16mm Mini Clamp Hook
- 1x 16mm Mini Clamp Housing
NOTE: This product is compatible uniquely with SmartCAM Zen PRO
Add to cart
SmartCAM Zen PRO Mini Clamp 19mm/.75in
€ 42.64
SKU: 000010273
EAN: 8051411193272

Additional MiniClamp for Zen PRO Core, designed to accommodate rods measuring 19mm (0.75 inches).
The kit include
- 1x 19mm Mini Clamp Hook
- 1x 19mm Mini Clamp Housing
NOTE: This product is compatible uniquely with SmartCAM Zen PRO
Add to cart
SmartHEAD M8 d.15mm Threaded Rod
€ 43.86
SKU: 000006860
EAN: 8051411192398

15mm high modulus Carbon Fiber rod.M8 male front threaded for a stable connection with Matrix Threaded bracketNOTE : This product is composed by 1 single rod.
Add to cart
SmartSLIDER Atom

Unprecedented portability for a slider that never let you down. A pure DIY experience with the freedom of choosing what you need, when you need and only if you need.Especially designed for DSLR and Mirrorless cameras
View products
SmartSLIDER Hard Case LT
€ 158.54
SKU: 000002263
EAN: 8051411190240

The light choice transport every SmartSystem slider in safeness. Thanks to the polypropylene outer case and the foam rubber inside padding, it is the best option for long travel, also by airplane.Made in ITALYInternal Dimensions: 117.5 x 29 x 12 cm Case Weight : 5.8kg
Add to cart
SmartSLIDER Hard Case Small
€ 354.96
SKU: 000004306
EAN: 8051411190912

Total protection for your SmartSLIDER against dust, water, impacts and corrosion for chemical agents.Perfectly optimized to carry up to SmartSLIDER PRO 560 and Reflex S 560 / S 410Internal Dimensions : 800 x 370 x 140 mm / 31.49 x 14.57 x 5.51 inch Weight : 6.2 kg / 13.66 lbsThis case is certified for:
- IP67
- certificate ATA300
- STANAG 4280
- DEF STAN 81-41
Add to cart
SmartSLIDER Hard Case Standard
€ 387.90
SKU: 000004307
EAN: 8051411190929

Total protection for your SmartSLIDER against dust, water, impacts and corrosion for chemical agents.Able to carry every SmartSLIDER PRO (Custom 1300 excluded) and Reflex SInternal Dimensions : 1100 x 370 x 140 mm / 43.30 x 14.57 x 5.51 inch Weight : 7.92kg / 17.40 lbsThis case is certified for:
- IP67
- certificate ATA300
- STANAG 4280
- DEF STAN 81-41
Add to cart
SmartSLIDER Hard Cases

SAFETY FIRST!
We know how important is to carry your equipment in the safest way possible.For this reason, we selected the best manufacturers in order to grant to your SmartSystem equipment, the safeness they deserve.All the products are completely Made in Italy
View products
SmartSLIDER Outrigger Feet
€ 257.36
SKU: 000003532
EAN: 8051411190257
- Set of two SMARTSLIDER OUTRIGGER FOOT
- Enhance the side stability of your SMARTSLIDER
- Adjustment grip knob
- Circular bubble level on each foot
- NEW - Completely Tool Free
- Protective case included
Add to cart
SmartSLIDER PRO

The strongest Camera Slider for Videomakers
SMARTSLIDER PRO joins an unprecedented smoothness to an extreme robustness. With SMARTSLIDER PRO it is possible to move every kind of camera and to take advantage of its incredible payload-independent smoothness. Versatile, thanks to its different fixing options, has a bunch of accessories ranging from bags to outrigger feet and, of course, a dedicated motorization kit.
View products
SmartSLIDER PRO MK2

The strongest Camera Slider for Videomakers
SMARTSLIDER PRO MK2 joins an unprecedented smoothness to an extreme robustness. With SMARTSLIDER PRO MK2 it is possible to move every kind of camera and to take advantage of its incredible payload-independent smoothness. And with the Patented Fluid Drag system, uneven or harsh start and stop slides are things of the past.Versatile, thanks to its different fixing options, has a bunch of accessories ranging from bags to outrigger feet and, of course, a dedicated motorization kit.
View products
SmartSLIDER Reflex Padded Bag

Designed and created to easily transport every SMARTSLIDER REFLEX S. The inner foam rubber padding grants protectiona against any type of shock. Pick it up from the transport handle or use the shoulder belt to keep your SMARTSLIDER REFLEX with you. Entirely made in high resistance woven.
This product is obsolete
Take a look at the new Unified Padded Bag
View products